Extreme Track MT-100

et-mt-100

ExtremeTracks MT-100 tracking device is specifically designed for motorcycle tracking and other applications requiring outdoor exposure and low power consumption. The MT-100 tracker provides the efficiency, durability, and technological advancements users need in a motorcycle tracker, and offers more features than other trackers in the same price range.

ZERO Power Consumption when Ignition is Off
The MT-100 eliminates common problems associated with motorcycle GPS trackers and excessive battery drain. The device features longer standby times, less power consumption while active, and NO power use when the ignition is off.

More Features of the MT-100
The MT-100 provides users with faster time to first fix (TTFF), Quad Band GSM frequencies 850/900/1800/1900, and water resistance to IPX-6 standards. The MT-100 is equipped with the sophisticated UBlox chipset, is compatible with a wide range of operating voltages (8-32 V DC), and includes an integrated GSM/GPS antenna. ExtremeTracks’s MT-100 tracking device includes a built-in backup battery, geo-fencing capabilities and more.

Technical Specifications

GSM Specifications

  • Frequency
    • Quad-Band: 850/900/1800/1900MHz
    • Compliant to GSM Phase 2/2+
    • Class 4 (2W @ 850/900MHz)
    • Class 1 (1W @ 1800/1900MHz)
  • GPRS
    • GPRS multi-slot class 12
    • GPRS mobile station class B
  • RMS Phase Error
    • 5 Deg
  • Max Out RF Power
    • 33.0dBm ± 2dBm
  • Dynamic Input Range
    • -15 ~ -102 dBm
  • Receiving Sensitivity
    • Class II RBER2%(-102dBm)
  • Stability Of Frequency
    • Greater than 2.5 ppm
  • Max Frequency Error
    • ± 0.1 ppm

GPS Specifications

  • GPS Chipset
    • UBlox. All-In-One Receiver. Sensitive Fast and Accurate
  • Sensitivity
    • Autonomous: -148 dBm
    • Hot Start: -160 dBm
    • Tracking: -162 dBm
  • Position Accuracy
    • Without Aid: 3.0 m 2D-RMS
    • DGPS: 2.5 m
  • TTFF (Open Sky)
    • Cold start 30s average
    • Warm start <30s
    • Hot start <1.2s

Benefits of GPS Vehicle Tracking:

Interfaces

  • Digital Inputs
    • Two digital inputs, one positive trigger for ignition detection, another is negative trigger
  • Analog Inputs
    • One analog input (0-30V)
  • Digital Outputs
    • One digital output, open drain, 150mA drive current max
  • Relay Outputs
    • One normally open relay with two connections, internal latch circuit, driver current 20A@DC12V max
  • GSM/GPS Antenna
    • Internal Only
  • Indicator LED
    • GSM, GPS and Power
  • Serial Port
    • Mini-USB for firmware upgrading or configuration

General Specifications

  • Dimension
    • 86mm * 62mm * 26mm
  • Weight
    • 100g
  • Backup Battery
    • Li-Polymer 1300 mAh, 3.7V
  • Standby Time
    • Without reporting: 180 to 220 HoursÂ
    • 5 minute reporting: 70 to 90 HoursÂ
    • 10 minute reporting: 100 to 120 Hours
  • Operation Voltage
    • 8 to 32V DC
  • Operation Temperature
    • -30C ~ +80C(Without Battery)
    • -40C~ +85C for Storage(Without Battery)
  • Power Management
    • Zero power consumption when ignition is off

Air Interface Protocol

  • Transmit Protocol
    • TCP, UDP, SMS
  • Scheduled Timing Report
    • Position reports at pre-set time and distance intervals
  • Geo-Fence
    • Geo-Fence alarm and parking alarm
  • Low Power Alarm
    • Alarm when internal battery is almost exhaustedÂ
  • Power On Report
    • Report when the device is powered on
  • Tow Alarm
    • With built-in motion sensor
  • Special Alarm
    • Special alarm based on the digital/analog inputs
  • Remote Control
    • Control the digital outputs through air interface protocol